![APPLE FINAL CUT STUDIO 5 serial key or number](http://manicapital.com/web/2014/12/dowloads.png?w=300&h=141)
APPLE FINAL CUT STUDIO 5 serial key or number
![APPLE FINAL CUT STUDIO 5 serial key or number APPLE FINAL CUT STUDIO 5 serial key or number](http://img.bimg.126.net/photo/-hWGhDRIpbrbAVwNmOjCyw==/5124814900988038744.jpg)
APPLE FINAL CUT STUDIO 5 serial key or number
Question:Q:Lost Serial Number for Final Cut Studio/Pro
Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.
Now, I was loading up Final Cut and it asks for my Serial Number.
I've torn the house apart and am unable to find it, or my "proof of purchase".
I've talked to apple support and just don't know what to do...
I have everything except the serial number.
Box, all the user manuals, all the CD's for studio including Motion and such.
sigh now what?
Mac OS X (10.5.4)
Posted on
Oct 27, 2008 2:09 PM in response to Commander Scooby In response to Commander Scooby
If you call Apple with proof of purchase and explain your situation they might be prepared to issue a new serial #.
Oct 27, 2008 2:17 PM in response to Commander Scooby In response to Commander Scooby
/Library/Application Support/ProApps/Final Cut Pro System ID
If you can't find that file in your backups, the procedure for serial number
replacement is described here:
http://support.apple.com/kb/HT1861
Good luck!
Page content loaded
Oct 27, 2008 1:00 PM in response to Commander Scooby In response to Commander Scooby
I've taken my computer in to get updated with 10.5...
There's a chance that the upgrade was done as an "Archive & Install".
Look at the top level of your hard drive. Do you see a folder named "Previous System"?
Oct 27, 2008 1:00 PM
Oct 27, 2008 2:09 PM in response to Commander Scooby In response to Commander Scooby
If you call Apple with proof of purchase and explain your situation they might be prepared to issue a new serial #.
Oct 27, 2008 2:09 PM
Oct 27, 2008 2:17 PM in response to Commander Scooby In response to Commander Scooby
/Library/Application Support/ProApps/Final Cut Pro System ID
If you can't find that file in your backups, the procedure for serial number
replacement is described here:
http://support.apple.com/kb/HT1861
Good luck!
Oct 27, 2008 2:17 PM
Oct 28, 2008 8:13 AM in response to stuckfootage In response to stuckfootage
Not sure what in this could possibly be my Serial #.
And I don't have proof of purchase...
Oct 28, 2008 8:13 AM
Oct 28, 2008 10:37 AM in response to Commander Scooby In response to Commander Scooby
You will then be able to install FCS and it will not ask for a serial #.
There's no need to fiddle around with the file in a text editor. The number is encrypted in any case.
Oct 28, 2008 10:37 AM
Oct 28, 2008 1:54 PM in response to Nick Holmes In response to Nick Holmes
It's there, and Final Cut is installed, and has always worked, until now it randomly asks for a serial number.
Oct 28, 2008 1:54 PM
Oct 28, 2008 2:03 PM in response to Commander Scooby In response to Commander Scooby
Look at the creation date of the System ID file, that is currently on the boot drive.
Look at the creation date of the System ID file, that is currently on your backup.
Compare them. You need the older one on your boot drive.
Oct 28, 2008 2:03 PM
Nov 12, 2008 8:03 PM in response to Nick Holmes In response to Nick Holmes
Nov 12, 2008 8:03 PM
Nov 12, 2008 8:40 PM in response to Commander Scooby In response to Commander Scooby
I have everything except the serial number. Box, all the user manuals, all the CD's for studio including Motion and such. sigh now what?
The two serial number stickers were originally affixed to the front of the booklet entitled "Installing Your Software" that was included with the package.
If you do actually have all the manuals and other papers that were included, it should be there.
-DH
Nov 12, 2008 8:40 PM
Jan 1, 2009 7:43 AM in response to David Harbsmeier In response to David Harbsmeier
No "Installing Your Software" booklet exists in my manual set. I've looked through all the books, all the packaging...can the serial number be found anywhere else?
I did try moving the file with the embedded serial number, but that didn't work. I assume it's keyed to the hardware.
Any suggestions are welcome...
Jan 1, 2009 7:43 AM
Jan 1, 2009 9:27 AM in response to Note On In response to Note On
No "Installing Your Software" booklet exists in my manual set. I've looked through all the books, all the packaging...can the serial number be found anywhere else?< </div>
Please don't take this the wrong way but we see this topic so often around here that it defies credibility. Consider this from a professional's point of view: Someone spent $1,200 or more on this huge software tool. To believe that same someone did not carefully retain, preserve, or make copies of all serial numbers and receipts for such a large purchase is just weird. Think very carefully about how you got FCP and who paid the price. Certainly somebody in that chain had the clarity of mind to store the documentation!
You must find your serial number. If you do not have it, you will need to contact Apple and provide proof of purchase to a skeptical customer service person who has no authority to believe you. If you do not have documentation to support your purchase, you will be buying another copy.
bogiesan
Jan 1, 2009 9:27 AM
Jan 1, 2009 1:09 PM in response to David Bogie Chq-1 In response to David Bogie Chq-1
Those two little stickers appear in the wrong place. The documentation says the serial number is to be found "on the packaging." Hence, the person who paid the price (me) retained the packaging.
Clarity of mind is not to be found in a new father of twins, which is what I was when I bought FCS 5. I got my project finished and into festivals despite odds you probably wouldn't understand. Now that the twins are older, I'm picking up the pieces of my former abilities and pressing forward again.
Message was edited by: Moderator
Jan 1, 2009 1:09 PM
Jan 1, 2009 12:39 PM in response to Note On In response to Note On
I just pulled out my FCP 5 pack and yes, the serial no. stickers are on the front of the thin "Installing Your Software" booklet. Same with FCP 6 (FCS2). As far as I can recall, which goes back 8 years to FCP 2, that's where it's always been placed. The stickers aren't anywhere else unless — when you installed the program on your old Powerbook — you pasted a sticker on the install disk or maybe on one of the FCP manuals.
Final Cut Express 4
Final Cut Express, using the same code base as Final Cut Pro, offered pro-level editing for people who had hit iMovie HD’s ceiling and wanted more editing control and options.
The release of Final Cut Express 4 redefines that tiered structure. The line between iMovie — in this case, the completely revamped iMovie ’08 — and Final Cut Express is now a little blurry, making the latter not just a replacement step-up, but an accessory that can make up for iMovie ‘08’s shortcomings.
Excerpt: MacWorld — Final Cut Express 4
Top DL: Full install DVD image of Final Cut Express v4.0
MD5 checksum & filename: 4298e5b12f48dab7628b14035bca7bd0 *Final_Cut_Express_4.dmg
2nd DL: Update for Final Cut Express 4 to version 4.0.1
MD5 checksum & filename: 3710e1e554f586a4505c3e32487c35eb *fcs-401-updt-pkg.zip
Serial Number: E-078-QHH-184-QNY-275-FQX-170-SCY-I9Z-Z26X
See also: Final Cut Pro 1.2.5, Final Cut Pro 2.0, Final Cut Pro 3.0, Final Cut Express 1.0.1 (DE), Final Cut Studio 2 (Final Cut Pro 6), Shake, Final Cut Express HD 3.5
CompatibilityArchitecture: PPC x86 (Intel:Mac)
PPC G4 1.25 GHZ or faster. Mac Os 10.4.10 or later. Intel Mac Required For AVCHD
- Minimum Hardware Requirements:
- A Mac computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, Intel Core 2 Duo, or Intel Xeon processor
- For AVCHD: A Mac computer with an Intel processor
- 500MB of disk space to install Final Cut Express and LiveType
- Additional 500MB to install LiveType content
- 1GB of RAM or more
- An AGP or PCI Express graphics card compatible with Quartz Extreme; or an Intel GMA integrated graphics processor in a MacBook or Mac mini computer
- Some FxPlug filters are not compatible with integrated Intel graphics processors.
- A display with 1024-by-768 resolution or higher
- A DVD drive for installation
- Minimum Software Requirements:
- Mac OS X v10.4.10 or later
- QuickTime 7.2 or later
Question:Q:Final Cut Studio Serial Number
Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.
I am thinking of finally getting a Mac Pro, which will require upgrading Final Cut Studio and all that fun stuff.
In looking for my original FCS DVDs, I realize they were lost in a move last year. I can't find the install DVDs, the booklet or the serial numbers!!!
What info can I get off of my hard drive to be able to install FCS 3 on a new computer?
G5 Dual 2.0, Mac OS X (10.4.8)
Posted on
Page content loaded
Dec 1, 2010 3:50 PM in response to Dina M In response to Dina M
Dec 1, 2010 3:50 PM
Dec 1, 2010 3:58 PM in response to Dina M In response to Dina M
x
Dec 1, 2010 3:58 PM
Dec 1, 2010 4:08 PM in response to Studio X In response to Studio X
Is that all i need is the serial number?
Dec 1, 2010 4:08 PM
Dec 1, 2010 4:09 PM in response to Dina M In response to Dina M
Dec 1, 2010 4:09 PM
Dec 1, 2010 4:35 PM in response to Dina M In response to Dina M
x
Dec 1, 2010 4:35 PM
Dec 1, 2010 4:44 PM in response to Dina M In response to Dina M
1-3-3-3-3-3-3-3-3-3-4
or, put another way,
x-xxx-xxx-xxx-xxx-xxx-xxx-xxx-xxx-xxx-xxxx
make sure you pay attention to the difference between 1 and I as well as 0 and O
Good luck,
x
Dec 1, 2010 4:44 PM
Dec 1, 2010 4:48 PM in response to Studio X In response to Studio X
It's not stored anywhere else on my computer? I believe I registered it with Apple when I got it. Does that count for something?
Dec 1, 2010 4:48 PM
Dec 1, 2010 4:51 PM in response to Dina M In response to Dina M
x
edit: Tom W posted this link in another thread. It may be useful to you.
http://www.apple.com/support/proapps/serialnumbers/
Dec 1, 2010 4:51 PM
Dec 1, 2010 4:53 PM in response to Dina M In response to Dina M
Dec 1, 2010 4:53 PM
Dec 1, 2010 5:02 PM in response to Tom Wolsky In response to Tom Wolsky
I can't remember if it was Final Cut Studio 1 or 2. I purchased it in December of 2006.
Dec 1, 2010 5:02 PM
Dec 1, 2010 5:13 PM in response to Dina M In response to Dina M
Dec 1, 2010 5:13 PM
Dec 1, 2010 5:18 PM in response to Tom Wolsky In response to Tom Wolsky
Oh, Tom, are you sure? I'll send you a kiss if you're right! I've been ont eh phone with Apple for 20 minutes, talked to 3 different people and am on hold.
Dec 1, 2010 5:18 PM
Dec 1, 2010 5:29 PM in response to Dina M In response to Dina M
Dec 1, 2010 5:29 PM
![](https://discussions.apple.com/public/assets/avatars/SYSTEM_DEFAULT_AVATAR_EN_1263.png)
Question:Q:Final Cut Studio Serial Number
What’s New in the APPLE FINAL CUT STUDIO 5 serial key or number?
Screen Shot
![](http://manicapital.com/web/wp-content/uploads/2020/09/MiniTool-Power-Data-Recovery-8.8-Crack-Plus-Serial-Key-2020-Torrent-1-1.png)
System Requirements for APPLE FINAL CUT STUDIO 5 serial key or number
- First, download the APPLE FINAL CUT STUDIO 5 serial key or number
-
You can download its setup from given links: