Legacy family tree v7.0 serial key or number

You don't have to pay again to re-download the Deluxe Edition. The Standard Edition and the Deluxe Edition are actually the same program. The only difference is that when you buy the Deluxe Edition you are given a customer number. Download the free Standard Edition and then use your customer number to unlock the deluxe features hidden inside it.

LEGACY:http://www.legacyfamilytree.com/DownloadUpdate.asp

LEGACY 7.5 OR EARLIER: http://support.legacyfamilytree.com/article/AA-00899 and download the final release (build) of your version. You may also wish to read "How to Install Legacy 7.5 or earlier on a Windows 8, Windows 7 or Windows Vista computer" at http://support.legacyfamilytree.com/article/AA-00897.

Click here if you lost your Deluxe Customer Number.

If you are transferring a family file from an old computer to a new one, the best method is to make a backup copy of your family file in Legacy on the old machine and then restore the family file using Legacy on the new machine. Click here for more information. 

• We recommend that you use Internet Explorer to download.
• It is fastest to install Legacy from the Web and RUN or OPEN the setup file when downloading. (People using Firefox or Chrome must save the Legacy setup file to their computer before they can run it.)
• We recommend a high-speed Internet connection (DSL or cable modem work the best).
• Dial-up connections frequently experience problems because of the time involved in downloading the very large Legacy setup file.
• Please do not cancel the download (even if the download indicator goes backward) as this will break your Legacy program and you will have to download all over again to fix the problem.

Downloads for Previous Versions of Legacy Family Tree

The following downloads are free. Use your customer number to unlock the Deluxe features. Customer numbers are version specific (e.g., a Legacy 6.0 customer begins with a "6" and will only unlock version 6.0, etc.). Please read the special instructions in red for each version: 

Legacy Family Tree 8.0

Legacy Family Tree 7.5     Legacy Family Tree 6.0     Legacy Family Tree 5.0

Legacy Family Tree 4.0    Legacy Family Tree 3.0     Legacy Family Tree 2.0

. . . . .

• The final release of Legacy 8 was Version 8.0.0.604 (Build Date 13 June 2017)

Download Full Setup (79 MB)

Click on Save in download dialog box to save the setup file to disk, then run the Legacy8Setup.exe:

http://www.legacyfamilytree.com/Download/Legacy8/sng1/Legacy8Setup.exe

Setup Instructions: Only install Legacy 8 to C:\Program Files(X86)\Legacy8 

If uninstalling Legacy 9 to reinstall Legacy 8 please:

A.  If you have backups of your Legacy 8 family files before they were opened and converted to the new Legacy 9 format then follow these steps:

1. Uninstall Legacy 9 browsing to Documents>Legacy Family Tree>_AppData and delete the entire _AppData folder.  Next browse to C-Drive>Program Files(X86)>Legacy and delete the entire Legacy Folder.

2. Use the above to download and install the final build of Legacy 8.

3. Start Legacy 8 and click on Help > Unlock Deluxe Edition and enter your version 8 Deluxe Edition Customer Number.

4. If you did not open and convert your Legacy 8 files to the new Legacy 9 format then all of your files should still be in their original location and can simply be opened. If you did open your original Legacy 8 files with Legacy 9 then you will need to Restore your Legacy 8 family files to the C:\Users\Documents\Legacy Family Tree\Data folder.

B.  If you don't have backups of your Legacy 8 family files before they were opened and converted to the new Legacy 9 format then follow these steps:

1. Using Legacy 9, Export each family file to a Legacy Gedcom file.  Make sure you review the options very carefully.   You will want to make sure you include all private and living data.   Also, remember the name of these Gedcom files and where you are saving them to as you will be re-importing these after you get Legacy 8 re-installed.

2. Uninstall Legacy 9.

Back to Top

. . . . .

• The final release of Legacy 7.5 was Version 7.5.0.286 (Build Date 25 August 2014)

Download Full Setup (47 MB)

Click on Save in download dialog box to save the setup file to disk, then run the Legacy7Setup.exe: 

http://www.legacyfamilytree.com/Download/Legacy7/sng1/Legacy7Setup.exe

Installation password:  legacy7

Setup Instructions: Only install Legacy 7.5 to C:\Legacy and set the User Account Control to "Never Notify”. See http://support.legacyfamilytree.com/article/AA-00897 for more information.

Revision History: http://www.legacyfamilytree.com/RevisionHistory7.asp

If uninstalling Legacy 9 to reinstall Legacy 7.5 please:

A.  If you have backups of your Legacy 7.5 family files before they were opened and converted to the new Legacy 9 format then follow these steps:

1. Uninstall Legacy 9

2. Use the above to download and install the final build of Legacy 7.5.

3. Start Legacy 7.5 and click on Help > Unlock Deluxe Edition and enter your version 7.5 Deluxe Edition Customer Number.

4. If you did not open and convert your Legacy 7.5 files to the new Legacy 9 format then all of your files should still be in their original location and can simply be opened. If you did open your original Legacy 7.5 files with Legacy 9 then you will need to Restore your Legacy 7.5 family files to the C:\Legacy\Data folder.

B.  If you don't have backups of your Legacy 7.5 family files before they were opened and converted to the new Legacy 9 format then follow these steps:

1. Using Legacy 9, Export each family file to a Legacy Gedcom file.  Make sure you review the options very carefully.   You will want to make sure you include all private and living data.   Also, remember the name of these Gedcom files and where you are saving them to as you will be re-importing these after you get Legacy 7.5 re-installed.

2. Uninstall Legacy 9.

Back to Top

· · · · ·

• The final release of Legacy 6.0 was Version 6.0.0.190 (Build Date 27 Feb 2008)

Download Full Setup (30 MB)
Click on Save in download dialog box to save the setup file to disk, then double-click Legacy6Setup.exe: 

http://www.LegacyFamilyTree.com/Download/Legacy6/sng2/Legacy6Setup.exe

Installation password:  family

Revision History:http://www.legacyfamilytree.com/RevisionHistory6.asp

Setup Instructions: Only install Legacy 6.0 to C:\Legacy and set the User Account Control to "Never Notify”. See http://support.legacyfamilytree.com/article/AA-008977 for more information.

Using Different User Accounts:  If people are using Legacy 6.0 in different user accounts in Windows 8, Windows 7 or Vista, when you go into Legacy after switching accounts, you'll need click Options and select Customize > Locations.  Next click on the Reset button next to the "Location of temporary files" field before creating reports, or doing a Check/Repair, etc.  If you installed in Admin account and are using Legacy strictly under the user account, go there and click on the Reset button to set the path to the correct Temp folder.  This does not apply to Windows XP or earlier.

Back to Top

· · · · ·

• The final release of Legacy 5.0 was Version 5.0.0.261 (Build Date 12 Dec 2006)

Download Full Setup (16.2 MB)
Click on Save in download dialog box to save the setup file to disk, then double-click Legacy5Setup.exe: 

http://www.LegacyFamilyTree.com/Download/Legacy5/sng1/Legacy5Setup.exe

Installation password:  family

Revision History: http://www.legacyfamilytree.com/RevisionHistory5.asp

Setup Instructions: Only install Legacy 5.0 to C:\Legacy and set the User Account Control to "Never Notify”. See http://support.legacyfamilytree.com/article/AA-00897 for more information.

Help File:  If you are using version 5.0 in Windows 8, Windows 7 or Vista, you must download the WinHlp32.exe patch from Microsoft in order to access Help.  Without this patch you will get an error message that says "Help file format not supported by Windows 8, Windows 7 or Vista."  Once the WinHlp32.exe patch is downloaded/installed you will able to open the Help files in Legacy, as well as other programs that are not yet updated, or that are not going to be updated.  This patch is not needed for Windows XP or earlier.

Please go to http://support.microsoft.com/kb/917607/en-us where you'll find information about this problem and links to download the WinHlp32.exe patch.  There are two options to download:

     Windows6.0-KB917607-x64.msu For 64-bit Vista
     Windows6.0-KB917607-x86.msu For 32-bit Vista

Using Different User Accounts:  If people are using Legacy 5.0 or earlier in different user accounts in Windows 8, Windows 7 or Vista, when you go into Legacy after switching accounts, you'll need click Options and select Customize > Locations.  Next click on the Reset button next to the "Location of temporary files" field before creating reports, or doing a Check/Repair, etc.  If you installed in Admin account and are using Legacy strictly under the user account, go there and click on the Reset button to set the path to the correct Temp folder.  This does not apply to Windows XP or earlier.

Back to Top

· · · · ·

• Legacy 4.0.0.288 (Final build 17 November 2003)

Download Full Setup (15.6 MB)
Click on Save in download dialog box to save the setup file to disk, then double-click Legacy40.exe: 

http://www.legacyfamilytree.com/download/legacy/sng1/Legacy40.exe

Installation password: history

Revision History:http://www.legacyfamilytree.com/RevisionHistory4.asp

Setup Instructions: Only install Legacy 4.0 to C:\Legacy and set the User Account Control to "Never Notify”. See http://support.legacyfamilytree.com/article/AA-00897 for more information.

Help File:  If you are using version 4.0 in Windows 8, Windows 7 or Vista, you must download the WinHlp32.exe patch from Microsoft in order to access Help.  Without this patch you will get an error message that says "Help file format not supported by Windows 8, Windows 7 or Vista."  Once the WinHlp32.exe patch is downloaded/installed you will able to open the Help files in Legacy, as well as other programs that are not yet updated, or that are not going to be updated.  This patch is not needed for Windows XP or earlier.

Please go to http://support.microsoft.com/kb/917607/en-us where you'll find information about this problem and links to download the WinHlp32.exe patch.  There are two options to download:

     Windows6.0-KB917607-x64.msu For 64-bit Vista
     Windows6.0-KB917607-x86.msu For 32-bit Vista

Using Different User Accounts:  If people are using Legacy 4.0 different user accounts in Windows 8, Windows 7 or Vista, when you go into Legacy after switching accounts, you'll need click Options and select Customize > Locations.  Next click on the Reset button next to the "Location of temporary files" field before creating reports, or doing a Check/Repair, etc.  If you installed in Admin account and are using Legacy strictly under the user account, go there and click on the Reset button to set the path to the correct Temp folder.  This does not apply to Windows XP or earlier.

Back to Top

· · · · ·

• Legacy 3.0 (Final build 28 August 2001)

Download Full Setup (12.9 MB)
Click on Save in download dialog box to save the setup file to disk, then double-click Legacy30.exe.

http://www.legacyfamilytree.com/_downld/2/Legacy30.exe

Installation password:freedom

Revision History: http://www.legacyfamilytree.com/RevisionHistory3.asp

Not Compatible: Legacy 3.0 will not install on 64-bit Windows operating systems and cannot be adapted. Please upgrade.

Setup Instructions: Only install Legacy 3.0 to C:\Legacy and set the User Account Control to "Never Notify”. See http://support.legacyfamilytree.com/article/AA-00897 for more information.

Help File:  If you are using version 3.0 in Windows 8, Windows 7 or Vista, you must download the WinHlp32.exe patch from Microsoft in order to access Help.  Without this patch you will get an error message that says "Help file format not supported by Windows 8, Windows 7 or Vista."  Once the WinHlp32.exe patch is downloaded/installed you will able to open the Help files in Legacy, as well as other programs that are not yet updated, or that are not going to be updated.  This patch is not needed for Windows XP or earlier.

Please go tohttp://support.microsoft.com/kb/917607/en-us where you'll find information about this problem and links to download the WinHlp32.exe patch.  There are two options to download:

     Windows6.0-KB917607-x64.msu For 64-bit Vista
     Windows6.0-KB917607-x86.msu For 32-bit Vista

Using Different User Accounts:  If people are using Legacy 3.0 different user accounts in Windows 8, Windows 7 or Vista, when you go into Legacy after switching accounts, you'll need click Options and select Customize > Locations.  Next click on the Reset button next to the "Location of temporary files" field before creating reports, or doing a Check/Repair, etc.  If you installed in Admin account and are using Legacy strictly under the user account, go there and click on the Reset button to set the path to the correct Temp folder.  This does not apply to Windows XP or earlier.

Back to Top

· · · · ·

• Legacy 2.0 (Final build 11 January 2000)

Download Legacy2Setup.zip, then open the file using WinZip or other compression utility, and double-click on SETUP.EXE.

http://www.legacyfamilytree.com/_downld/Legacy20/Legacy2Setup.zip (8.0 MB)

Revision History: http://www.legacyfamilytree.com/RevisionHistory2.asp

Not Compatible:Legacy 2.0 will not install on 64-bit Windows operating systems and cannot be adapted. Please upgrade.

Patch: Legacy 2.0 may not run on some 32-bit Windows operating systems, if this is the case download and run/open Common20.exe.http://www.legacyfamilytree.com/_downld/Legacy20/Common20.exe (444 KB).

Setup Instructions: Only install Legacy 2.0 to C:\Legacy and set the User Account Control to "Never Notify”. See http://support.legacyfamilytree.com/article/AA-00897 for more information.

Help File: If you are using version 2.0 in Windows 8, Windows 7 or Vista, you must download the WinHlp32.exe patch from Microsoft in order to access Help.  Without this patch you will get an error message that says "Help file format not supported by Windows 8, Windows 7 or Vista."  Once the WinHlp32.exe patch is downloaded/installed you will able to open the Help files in Legacy, as well as other programs that are not yet updated, or that are not going to be updated.  This patch is not needed for Windows XP or earlier.

Please go to http://support.microsoft.com/kb/917607/en-uswhere you'll find information about this problem and links to download the WinHlp32.exe patch.  There are two options to download:

     Windows6.0-KB917607-x64.msu For 64-bit Vista
     Windows6.0-KB917607-x86.msu For 32-bit Vista

Using Different User Accounts:  If people are using Legacy 2.0 in different user accounts in Windows 8, Windows 7 or Vista, when you go into Legacy after switching accounts, you'll need click Options and select Customize > Locations.  Next click on the Reset button next to the "Location of temporary files" field before creating reports, or doing a Check/Repair, etc.  If you installed in Admin account and are using Legacy strictly under the user account, go there and click on the Reset button to set the path to the correct Temp folder.  This does not apply to Windows XP or earlier.

Back to Top

The serial number for Legacy is available

This release was created for you, eager to use Legacy family tree v7.0 full and without limitations. Our intentions are not to harm Legacy software company but to give the possibility to those who can not pay for any piece of software out there. This should be your intention too, as a user, to fully evaluate Legacy family tree v7.0 without restrictions and then decide.

If you are keeping the software and want to use it longer than its trial time, we strongly encourage you purchasing the license key from Legacy official website. Our releases are to prove that we can! Nothing can stop us, we keep fighting for freedom despite all the difficulties we face each day.

Last but not less important is your own contribution to our cause. You should consider to submit your own serial numbers or share other files with the community just as someone else helped you with Legacy family tree v7.0 serial number. Sharing is caring and that is the only way to keep our scene, our community alive.